Flat Panel Interface; Audio Function - Advantech POC-155 User Manual

• CPU: Socket 479 Intel® Pentium® Mobile up to 2.0 GHz
• BIOS: Award 512 KB Flash BIOS, supports Plug & Play, APM
• Chipset: Intel® 915GM GMCH, 82801FBM (ICH6-M)
• Front side Bus: FSB 533/400 MHz
• RAM: 240 pins DDR2 DIMM slots x 2, supports unbuffered 400/533
MHz DDR2 SDRAM (Non ECC), capacity maximum to 2 GB
• IDE interface: ATA/100 x 1. Supports one IDE device.
• SATA interface: SATA x 1. Supports one SATA device.
• Parallel port: Parallel port x 1, supports SPP/BPP/EPP/ECP parallel
mode.
• Serial ports: RS-232 port x 3, they are all compatible with 16C550
UARTs. COM2 has optical isolation and supports RS-422/485 by
jumper selection; COM1/COM2/COM3 support +5 by jumper
selection
• Universal serial bus (USB) port: USB 2.0 port x 8 (6 external, 2
internal)
• IEEE 1394 port: IEEE 1394a port x 3.
• Expansion slot: PCI 33 MHz slot x 1
• Watchdog timer: 62-level, interval 1 ~ 62 seconds. Automatically
generates system reset when the system stops due to a program error or
EMI.
• CMOS Battery (BIOS): 3.0 V @ 195 mA lithium battery

1.2.3 Flat panel interface

• SDVO Interface: Chrontel 7308A Single/Dual LVDS transmitter
• Display resolution: Supports LVDS LCD panel resolutions up to 1600
x 900
• Graphic Chipset: Intel® Graphics Media Accelerator (GMA) 900
• Shared memory: Dynamic Video Memory Technology (DVMT) 3.0
to dynamically allocate up to 128 MB of system memory for graphics
usage.
• Display type: Simultaneously supports CRT

1.2.4 Audio function

• Chipset: Realtek ALC203, compliant with AC'97 rev 2.2
• Audio controller: 18-bit codec, full-duplex stereo codec
3 Chapter 1