Table of Contents
Advertisement
SE-1010 PC ECG User Manual
Configuring the System
Note: Click on the New Patient button on the initial interface to open the Patient
information interface as the above figure shows.
9.1.2 Setting ID Mode
Set ID Create Type to Auto Create, Manually input or Auto increase.
When ID Create Type is set to Auto Create, the patient ID can be automatically generated
according to the examination date.
When ID Create Type is set to Manually input, you should enter the patient ID manually on the
Patient information interface.
When ID Create Type is set to Auto increase, the patient ID can be increased by one
automatically.
- 109 -
Advertisement
Table of Contents
