Table of Contents
Advertisement
SE-1010 PC ECG User Manual
4) Electrodes:
♦
Check whether all electrodes are connected to lead wires of the patient cable
correctly.
♦
Ensure that the electrodes do not contact.
5) Patient:
♦
The patient should not come into contact with conducting objects such as earth, metal
parts etc.
♦
Ensure the patient is warm and relaxed, and breathes calmly.
1. The system is intended to be used by qualified physicians or personnel professionally
trained. They should be familiar with the contents of this user manual before operation.
2. Before connecting the device to the power line, make sure that the voltage and
frequency ratings of your power line match those indicated on the device label. For
details, see Appendix 1, "Technical Specifications".
3. Before use, the system, patient cable, electrodes etc. should be checked.
Replacement should be taken if there is any evident defectiveness or aging symptom
which may impair the safety or the performance.
WARNING
- 27 -
Preparations Before Operation
Advertisement
Table of Contents
