Pretest Phase - EDAN SE-1010 User Manual

SE-1010 PC ECG User Manual Operation Instructions for Exercise ECG
4. Select a lowpass filter from the lowpass filter pull-down list .

7.5 Pretest Phase

Notes:
1. If the test time exceeds 40 minutes, the system will enter the monitoring status. Data
will not be saved or printed any more.
2. The length of the pretest phase is not fixed, but it should be no less than 15 seconds.
When the tracings are satisfying and you have specified the desired settings, you can start the
pretest.
Click on the Pretest button on the pre-sampling interface (Figure 7-1) to enter the pretest phase.
- 81 -