Wireless Station Configuration - LevelOne WBR-3400TX User Manual

54mbps wireless ap router w/ 4-port switch

Hide thumbs Also See for WBR-3400TX:

Table of Contents

Wireless Station Configuration

This section applies to all Wireless stations wishing to use the LevelOne 54Mbps Wireless AP

Router's Access Point, regardless of the operating system which is used on the client.

To use the Wireless Access Point in the LevelOne 54Mbps Wireless AP Router, each Wireless

Station must have compatible settings, as follows:

Mode

SSID (ESSID)

WEP

Note:

By default, the LevelOne 54Mbps Wireless AP Router will allow both 802.11b and 802.11g

connections.

The mode must be set to Infrastructure.

This must match the value used on the LevelOne 54Mbps Wireless AP

Router. The default value is default

Note! The SSID is case sensitive.

By default, WEP on the LevelOne 54Mbps Wireless AP Router is

disabled.

•

If WEP remains disabled on the LevelOne 54Mbps Wireless AP

Router, all stations must have WEP disabled.

•

If WEP is enabled on the LevelOne 54Mbps Wireless AP Router,

each station must use the same settings as the LevelOne 54Mbps

Wireless AP Router.

PC Configuration

Table of Contents