Operation
36
8.10.1
"Language" screen
On the "System" screen, tap Language. The "Language" screen opens.
The operator can switch freely between English and German as the menu language. The
default system language at startup is English.
8.10.2
"Prover Settings" screen
On the "System" screen, tap Prover Settings. The "Prover Settings" screen opens
(→ 37).
The operator can navigate from here to the following seven tabs:
• General
• Proving
• Master Meter
• Duty Meter
• Units
• I/O Config.
• Flow Stability
During the commissioning phase, before the system can be put into operation, all
settings must first be configured in accordance with the actual application in the field.
"General" tab
The operator can define the "Customer Name", which is displayed in the status bar on every
page, as well as the "Customer Location" and "Site Reference".
Master Meter System
A0048066
Endress+Hauser
Need help?
Do you have a question about the Master Meter System and is the answer not in the manual?