Checking The Movable Parts; Service Every 50 Hours; Lubricating Fittings With Grease - Kubota BX1880-AU Operator's Manual

DAILY CHECK
• Check the connectors and the terminals for
looseness, contamination,
discolored connections.
• Check the instrument panel for correct operation of
the switches and the gauges.
Consult your KUBOTA Dealer regarding maintenance,
diagnosis, and repair.

12. Checking the movable parts

1. If any of the movable parts, such as levers and
pedals, is not smoothly moved because of rust or
sticky material, remove the rust or the sticky
material, and apply oil or grease on the relevant
spot.
Do not force the movable parts into motion.
Otherwise, the machine may get damaged.

SERVICE EVERY 50 HOURS

1. Lubricating fittings with grease

Apply a small amount of multipurpose grease to the
following points every 50 hours.
If you operated the machine in extremely wet and
muddy conditions, lubricate grease fittings more often.
Apply grease between rod and hole.
BX1880, BX2380, BX2680
or overheated or
PERIODIC SERVICE
81