Kubota BX1880-AU Operator's Manual page 19

1. Care for safety labels
• Keep the safety labels clean and free from
obstructing material.
• Clean the safety labels with soap and water, and
dry the safety labels with a soft cloth.
• Replace damaged or missing safety labels with new
safety labels from your local KUBOTA Dealer.
• If a component with safety label(s) attached is
replaced with new component, make sure that new
safety label(s) is (are) attached in the same
location(s) as the replaced component.
• Attach new safety labels by applying on a clean, dry
surface and pressing any bubbles to outside edge.
BX1880, BX2380, BX2680
SAFE OPERATION
15