Cleaning Grill, Radiator Screen And Oil Cooler; Checking Brake Pedals And Clutch Pedal; Checking Gauges, Meter And Easy Checker(Tm); Checking Head Light, Hazard Light Etc - Kubota STV32 Operator's Manual

BCleaning Grill, Radiator Screen and Oil
Cooler
To avoid personal injury:
A Be sure to stop the engine before removing the
screen.
1. Check front grill to be sure it is clean from debris.
2. Detach the screen and remove all foreign material.
(1) Radiator screen
(2) Oil cooler
A Grill and screen must be clean from debris to prevent
engine from overheating and to allow good air intake
for air cleaner.
A Detach the screen after lifting the air cleaner assy.
Do not detach the screen lifting only the air cleaner
duct.
(1) Radiator screen
(2) Air cleaner assy
(3) Air cleaner duct
(A) "DETACH"
PERIODIC SERVICE
BChecking Brake Pedals and Clutch Pedal
To avoid personal injury:
A Be sure brake pedals have equal adjustment
when using locked together. Incorrect or
unequal brake pedal adjustment can cause the
tractor to swerve or roll-over.
1. Inspect the brake and clutch pedals for free travel, and
smooth operation.
2. Adjust if incorrect measurement is found:
(See "Adjusting Clutch Pedal" and "Adjusting Brake
Pedal" in "EVERY 100 HOURS" in "PERIODIC
SERVICE" section.)
BChecking Gauges, Meter and Easy
Checker(TM)
1. Inspect the instrument panel for broken gauge(s),
meter(s) and Easy Checker(TM) lamps.
2. Replace if broken.
BChecking Head Light, Hazard Light etc.
1. Inspect the lights for broken bulbs and lenses.
2. Replace if broken.
BChecking ROPS and CAB
1. Always check condition of ROPS and CAB attaching
hardware before operating tractor.
2. Replace if damaged.
BChecking Movable Parts
If any of the movable parts, such as levers and pedals, is
not smoothly moved because of rust or anything sticky, do
not attempt to force it into motion.
In the above case, remove the rust or the sticky thing, and
apply oil or grease on the relevant spot.
Otherwise, the machine may get damaged.
57