4.
Once a connection is established, select either the [Default] or the
[Wizard] function from the settings mode page.
4
Wizard
Whether you select either the [Default] or the [Wizard] option for
performing configuration, both are used to configure the Pan ID, Node ID,
RF Channel, RF Power and so the relevant parameters.
5.
Once the module configuration has been completed, the message "The
Configuration was successful" will be displayed and it means the
configuration has completed.
ICP DAS, ZT-2510 User Manual, Version 2.0
Copyright @ 2012 by ICP DAS Co., Ltd. All Rights Reserved.
Default
Page 15