Zt-2510 Front View - ICP DAS USA ZT-2510 Series User Manual

3.2 ZT-2510 Front View

System LED Indicator
UL 94V-0 materials
1. LED Indicator of System：
LED Indicator LED Color
ZigBee Net
ZigBee RxD
ZigBee PWR
※ For more details, please see the section 6 troubleshooting.
2. +10 ~+30V

The ZigBee PWR indicator will be steady light if correct power input.
3. USB Type B：

The port is used to configure ZT-2510 without providing any power
additionally.
4.
2.4GHz RP-SMA Omni-directional Antenna：

If there is any requirement for extension cable, it must be a connector with
the type RPSMA and resistance 50 Ohm. Ex. 3S001-1, 3S003-1...etc
ICP DAS, ZT-2510 User Manual, Version 2.0
Copyright @ 2012 by ICP DAS Co., Ltd. All Rights Reserved.
1
Explain
Green The status of ZigBee network.
Yellow The status of ZigBee communication
Red The status of module board
Power input：
DC
2.4GHz RP-SMA Antenna
4
USB Type B
3
+10~+30 V
2
DC
Page 8
Power input