Zt Series Module Settings - ICP DAS USA ZT-257 Series Quick Start Manual

3

ZT Series Module Settings

When using the ZT-257x module as a data concentrator, the first task that must be
performed is to establish a ZigBee network between the ZT-257x module and the remote
ZT-20xx-IOG module so that the physical DIO channel data can be automatically and
correctly sent to the Modbus Register on the ZT-257x module. For more details about
configuring the ZT-257x module, follow the instructions below.
Using for the first time
Connect to a ZT-20xx-IOG
Section 3.2
Configure the ZT-2570
first
Establish a ZigBee
connection
Section 3.1.1
Configure the
ZT-20xx-IOG (RUN)
(via the ZT-2570)
ICP DAS, ZT-257x DIO Data Concentrator Quick Start Guide, v1.0
For maintenance
(ZT-20xx-IOG: Online)
Establish a ZigBee
Section 3.1.1
Configure the
ZT-20xx-IOG (RUN)
(via the ZT-2570)
The data concentrator and
the IOG begin working
Copyright © 2016, by ICP DAS Co., LTD. All Rights Reserved
connection
For maintenance
(ZT-20xx-IOG: Offline)
Connect to a ZT-20xx-IOG
Section 3.1.2
Configure the ZT-2570 (1)
and the ZT-20xx-IOG (INIT)
Establish a ZigBee
connection
Configure the ZT-20xx-IOG
(via the ZT-2570)
Create a connection to the
ZT-20xx-IOG
Section 3.1.1
Configure the ZT-2570 (2)
and the ZT-20xx-IOG (RUN)
Page 12