Renesas RTE7702500EAB00000J User Manual page 21

Emulation Adapter
(21) Mode setting switch: SW1
SW1 (mode
setting switch)
SW1-1: DBGSEL0
SW1-2: DBGSEL1
SW1-3: PEMD0
SW1-4: PEMD1
SW1-5: PEMD2
SW1-6
Note: For more information, refer to section 5.2 of chapter 5, Operating Mode Table, in the RH850/U2B Group
User's Manual: Hardware.
R20UT5180EJ0110 Rev. 1.10
Sep.12.22
This sets the levels on the DBGSEL0 and DBGSEL1 pins for the debug chip.
DBGSEL1 Pin
Turned on: low
(default)
Turned on: low
Turned off: high
Turned off: high
This sets the level on the PEMD0 pin for the debug chip.*
Turned on: low
Turned off: high (default)
This sets the level on the PEMD1 pin for the debug chip.*
Turned on: low (default)
Turned off: high
This sets the level on the PEMD2 pin for the debug chip.*
Turned on: low (default)
Turned off: high
Fixed as turned on.
Names and Functions of Hardware
Specification
DBGSEL0 Pin
Turned on: low
(default)
Turned off: high
Turned on: low
Turned off: high
JP0-pin Group (CN1)
E2 emulator
IE850A
Setting prohibited.
Page 11 of 63