Table of Contents
Advertisement
Emulation Adapter
Operating the switch:
(4) Status LEDs: LED1 (3.3 V) and LED2 (5 V)
Name of LED
LED1 (3.3 V)
LED2 (5 V)
(5) Jumper blocks: JP1 to JP21 (selecting each of the power-supply voltages)
The target power-supply voltages for each of these jumper blocks are listed below.
JP1
JP2
JP3
JP4
JP5
JP6
JP7
JP8
JP9
JP10
JP11
JP12
JP13
JP14
JP15
JP16
JP17
JP18
JP19
JP20
JP21
R20UT5180EJ0110 Rev. 1.10
Sep.12.22
Do not operate a switch before removing static electricity from the operator's body.
Doing so may lead to the discharge of static electricity and so damage the internal
circuits.
Illuminated: The 3.3-V power supply on the base board is on.
Not illuminated: The 3.3-V power supply on the base board is off.
Illuminated: The 5-V power supply on the base board is on.
Not illuminated: The 5-V power supply on the base board is off.
JP
Names and Functions of Hardware
CAUTION
Specification
Target Power-Supply Voltage
A0VCC
A1VCC
A2VCC
A3VCC
A0VREFH
A1VREFH
A2VREFH
A3VREFH
ADSVCC
ADSVREFH
AFCVCC
E0VCC
E1VCC
E2VCC
LVDVCC
SYSVCC
VCC/OSCVCC/J0VCC/J1VCC
SVRVCC
SVRDRVCC
GETH0PVCC
GETH0BVCC
Page 15 of 63
Advertisement
Table of Contents
