Renesas RTE7702500EAB00000J User Manual page 18

Emulation adapter for the rh850/u2b
Table of Contents

Advertisement

Emulation Adapter
(7) Jumper block: JP10 (AURORES)
JP10 (AURORES)
Open-circuit
1-2 short-circuit
(default)
2-3 short-circuit
(8) Jumper block: JP11 (EXAURORES)
JP11 (EXAURORES)
Open-circuit
1-2 short-circuit
(default)
2-3 short-circuit
(9) Jumper block: JP14 (TRST_SEL)
JP14 (TRST_SEL)
Open-circuit
1-2 short-circuit
(default)
2-3 short-circuit
(10) Jumper block: JP2 (FLMD0)
JP2 (FLMD0)
Open-circuit
1-2 short-circuit
(default)
2-3 short-circuit
(11) Jumper block: JP12 (FLMD0_SEL)
JP12 (FLMD0_SEL)
Open-circuit
1-2 short-circuit
(default)
2-3 short-circuit
R20UT5180EJ0110 Rev. 1.10
Sep.12.22
This setting is made when external tracing (Aurora tracing) is not to be used.
The AURORES pin for the debug chip is set to the low level.
This setting is made when external tracing (Aurora tracing) is to be used.
The AURORES pin for the debug chip is controlled in combination with the
operation of the TRST pin of the CN1 connector for external tracing.
This setting is made when external tracing (Aurora tracing) is to be used.
The AURORES pin for the debug chip is controlled by pin 8 of the CN1 connector
for external tracing or by the target system.
This specification depends on the settings of JP11.
Setting prohibited.
This setting is made when external tracing (Aurora tracing) is to be used.
The AURORES pin for the debug chip is controlled by the target system.
This setting is made when external tracing (Aurora tracing) is to be used.
The AURORES pin for the debug chip is controlled by pin 8 of the CN1
connector for external tracing.
Setting prohibited.
The TRST pin for the debug chip is controlled by the emulator (CN1 connector for
external tracing).
Setting prohibited.
Setting prohibited.
The FLMD0 pin for the debug chip is controlled by the emulator (CN1 connector
for external tracing).
The FLMD0 pin for the debug chip is controlled by the target system.
Setting prohibited.
The FLMD0 pin for the debug chip is controlled by the emulator (CN1 connector
for external tracing).
Setting prohibited.
Names and Functions of Hardware
Specification
Specification
Specification
Specification
Specification
Page 8 of 63

Advertisement

Table of Contents
loading

Table of Contents