Ordering Information; Ordering Key; Material, Finishing; Material - Mandik FDMC Manual

IV. ORDERING INFORMATION

10. Ordering key

FDMC 180 TPM 083/12-DK
V. MATERIAL, FINISHING

11. Material

Damper bodies are supplied in the design made of galvanized plate without any other surface
11.1.
finish.
Damper blades are made of fire resistant asbestos free boards made of mineral fibres.
11.2.
Fasteners is galvanized.
11.3.
VI. INSPECTION, TESTING

12. Inspection, testing

The appliance is constructed and and preset by the manufacturer, its operation is dependent on
12.1.
proper installation and adjustment.
VII. TRANSPORTATION AND STORAGE

13. Logistic terms

Dampers are transported by box freight vehicles without direct weather impact, there must not
13.1.
occur any sharp shocks and ambient temperature must not exceed + 40 °C. Dampers must be
protected against mechanic damages when transported and manipulated. During transportation,
the damper blade must be in the "CLOSED" position.
Dampers are stored indoor in environment without any aggressive vapours, gases or dust. Indoor
13.2.
temperature must be in the range from -5 °C to +40 °C and maximum relative humidity 80 %.
Dampers must be protected against mechanic damages when transported and manipulated.
VIII. ASSEMBLY, ATTENDANCE, MAINTENANCE AND REVISIONS

14. Assembly

All effective safety standards and directives must be observed during fire damper assembly.
14.1.
To ensure reliable fire damper function it is necessary to avoid blocking the closing mechanism
14.2.
and contact surfaces with collected dust, fibre and sticky materials and solvents.
Manual operation
14.3.
Without power supply, the damper can be operated manually and fixed in any required
position. Release of the locking mechanism can be achieved manually or automatically
by applying the supply voltage.
Park Allé 366, DK-2605 Brondby
Telefon 70 20 19 11; E-mail:oeland@oeland.dk
technical specifications
size
type (FDMC, FDMC-SRD)
15
TPM 083/12