• XON/XOFF supported receiving data (R34.4 [} 39]),
(default: deactivated)
• Send FIFO data continuously (R34.6 [} 39]),
(default: deactivated)
• Extended process data interface (R34.7 [} 39]),
(set automatically)
• Transfer rate optimization (R34.8 [} 39]),
(default: activated)
4.5
KL6041 - Common Settings
Common Settings tab for parameterization of the KL6041.
Fig. 18: Settings via KS2000
General
Take Settings for all channels of this terminal
The settings made are adopted for all channels of the terminal (default: deactivated).
Process Data Length (R34.7 [} 39])
Here, you can set the user data length (3, 5 or 22 bytes) of the process data image (default: 22 bytes).
Set Factory Settings (R7 [} 38])
Here, you can restore the terminal's factory settings and save them with "Apply".
KL6031/KS6031, KL6041/KS6041
Version: 2.1.0
KS2000 Configuration Software
29