Table of Contents
Advertisement
DS-6700HFHI/V Series Network HD Encoder User Manual
4.
Confirm the password.
5.
Click OK to save the password and enter the live view interface.
3.2 Setting Admin Password and Modifying
Network Parameters via Client Software
The client software is versatile video management software for multiple kinds of devices.
Get the client software from the supplied disk or the official website, and install the software according to the
prompts. Follow the steps to activate the camera.
Steps:
1.
Run the client software and the control panel of the software pops up, as shown in the figure below.
2.
Click the Device Management icon to enter the Device Management interface, as shown in the figure below.
Figure 3. 2 Control Panel
12
Advertisement
Table of Contents
