Table of Contents
Advertisement
DS-6700HFHI/V Series Network HD Encoder User Manual
Chapter 11 Log Search and Maintenance
11.1 Log Search
Purpose
The operation, alarm, exception and information of the device can be stored in log files, which can be viewed and
exported at any time.
Before you start
The Log function can be realized only when the Encoder is connected with Micro SD card or network disk. And
make sure the disk has been initialized for the first time to use
details.
Steps:
1.
Click Configuration > System > Maintenance > Log to enter the Log interface.
2.
Set the log search conditions to refine your search, including the Major Type, Minor Type, Start Time and End
Time.
3.
Click the Search button to start searching log files.
4.
The matched log files will be displayed on the list shown below.
Up to 100 log files can be displayed each time.
5.
You can click the Export button to save the searched log files to local directory.
Figure 11. 1 Log Search Interface
70
.
Please refer to Section Adding Network Disk for
Advertisement
Table of Contents
