HIKVISION DS-6700HFHI/V Series User Manual page 65

DS-6700HFHI/V Series Network HD Encoder User Manual
Task 2: Deleting the Record Schedule
Click a segment on the time line configured with record schedule, and click the Delete from the pop-up
configuration box or click the
You can also click
Configuring Advanced Record Settings
1. Click Configuration > Storage > Schedule Settings > Record Schedule to enter record schedule settings
interface.
2. Click Advanced to configure the advanced record parameters.
 Record Audio: Enable or disable the audio record.
 Pre-record: The Pre-Record time can be configured as No Pre-Record, 5 s, 10 s, 15 s, 20 s, 25 s or 30 s.
 Post-record: The Post Record time can be configured as 5 s, 10 s, 30 s, 1 min, 2 min, 5 min or 10 min.
 Stream Type: Select the Main Stream and Sub Stream for analog camera recording.
 Expired Time: The expired time is the longest time for a record file to be kept in the HDD, if the deadline
is reached, the file will be deleted. You can set the expired time to 0, and then the file will not be deleted.
The actual keeping time for the file should be determined by the capacity of the HDD.
3. Click Save to save the settings.
Figure 8. 12 Edit the Record Schedule
to delete the selected record schedule of a day.
to clear the record schedule settings of all days.
Figure 8. 13 Delete the Record Schedule
Figure 8. 14 Edit Schedule
64