Table of Contents
Advertisement
DS-6700HFHI/V Series Network HD Encoder User Manual
Chapter 4 Access to DS-6700 by WEB
The DS-6700 can also be accessed by WEB Browser for configuration and operation. The supported WEB
browsers include: Internet Explorer 6/7/8/9, Firefox 3.5 and above, Chrome 8 and above, Safari 5.0.2 and above,
Windows XP SP1 and above (32-bit).
Before you start:
Before access, you need to configure the network settings of device according to Chapter 3 Activation
and Initial Network Configuration for the Encoder.
Connect the device to the LAN, and prepare a PC connected to the same LAN with the device.
The factory default IP address of the device is 192.0.0.64.
Steps:
1.
Open WEB browser, input the IP address of DS-6700 (e.g., http://192.0.0.64) and then press the Enter key
on PC. The system will display the login interface.
When the HTTPS feature is enabled, the system will use the HTTPS login mode (e.g., https://192.0.0.64) by
default after
you input the IP address. You can also input http://IP address/index.asp
http://192.0.0.64/index.asp) if you want to use HTTP mode to log into the device.
2.
Input the user name and the password to log into the system.
In the Login dialog box, if you have entered the wrong password for 7 times for the admin user or 5 times for the
normal user, the current user account will be locked for 60 seconds.
3.
On the main page of DS-6700, you need to download and install the plug-in.
(1) Click on the live view window by following the hints on the screen.
Browser
Figure 4. 1 Login Page
15
(e.g.,
Advertisement
Table of Contents
