Network Configuration; Configure Network Parameters; Configure Http(S) - HIKVISION DS-6900UDI Series User Manual

DS-6900UDI(C) Series Ultra HD Video and Audio Decoder • User Manual

3.2 Network Configuration

Step 1 Click Configuration > Network > Network Settings > TCP/IP to configure network
parameters, such as the IPv4 address, IPv4 subnet mask, IPv4 default gateway, and the IP
addresses of preferred and alternative DNS server.
Figure 3-14 Configure Network Parameters
Step 2 Click Save.
Step 1 Click Configuration > Network > Network Services > HTTP(S) to enter the following page.
 HTTP Port
The port for the browser to access the device. When the HTTP port is changed to 81, you need to
enter http://Device IP Address:81 on the browser address bar.
 Enable HTTPS
Use HTTPS to access the device while setting the HTTPS port. When editing the HTTPS port to 443
and logging in using a browser, you need to enter https://Device IP Address:443 on the browser
bar.
 Redirect to HTTPS Automatically
If enabled, HTTPS will be used by default when accessing the device.
27