Thermo Scientific Nicolet iS50 Getting Started page 9

L Sample
compartment
Accessory and
Purge ports
(inside)
M Detector access
cover
N Emissions port
(left back)
The sample compartment Accessory and Purge ports are used
to connect accessories that have detectors or power needs,
such as the sample shuttle, and accessories that require purge.
The detector access cover allows access to the detector
compartment where a standard TGS detector and up to two
additional detectors may be installed.
Notice: Detectors are sensitive to static electricity. To preserve
their integrity, leave them in their shipped configuration or
packaging until you have reviewed the instructions for handling
them. For more information, see "Removing a Detector" and
"Installing a Detector" in the spectrometer Help.
The emissions port on the left side of the spectrometer can be
used to send light from an external source through the aperture
and into the interferometer, allowing high resolution studies of
external emissions.
9
Nicolet iS50 SpectrometerGetting Started
What are the features?