Nicolet iS50 SpectrometerGetting Started
What are the features?
What is on the back panel?
The following image shows the connectors that are on the back panel of your spectrometer:
NOTICE
Improper or unsafe cabling can cause damager to system hardware and may create a safety
hazard. We are not responsible for damage or injury resulting from improper or unsafe cabling.
Refer to your spectrometer Site and Safety Guide for details.
Table 1-2: Back panel connectors
A
Auxiliary
Can be used to connect the remote start cable or iS50 Hub. This
signals
port is also used by service personnel to check the function of the
spectrometer.
10