Thermo Scientific Nicolet iS50 Getting Started page 23

Nicolet iS50 SpectrometerGetting Started
How do I check performance?
To check the performance of your spectrometer, run the qualification and performance
verification (PV) workflows in OMNIC Paradigm software.
These worfklows use an established standard sample to check performance of the
instrument. Each test follows different regulatory standards.
Table 1-1: Qualification and performance verification workflows
Nicolet FTIR - PV Test
Nicolet FTIR - Factory
Qualification
Nicolet FTIR -
CP Qualification
Nicolet FTIR - JP
Qualification
Nicolet FTIR -
PHEUR Qualification
Nicolet FTIR -
USP Qualification
Nicolet iS50 ATR -
PHEUR Qualification
Nicolet iS50 ATR -
PV Test
Thermo Scientific
Measures the basic performance of the
spectrometer based on factory recommended tests.
Runs factory recommended tests and all
qualification tests.
Executes the qualification tests for the RaptIR as
defined in the Chinese Pharmacopoeia.
Executes the qualification tests for the RaptIR as
defined in the Japanese Pharmacopoeia.
Executes the qualification tests for the RaptIR as
defined in the European Pharmacopoeia.
Executes the qualification tests for the RaptIR as
defined in the US Pharmacopoeia.
Executes the qualification tests for the ATR
accessory on the spectrometer as defined in the
European Pharmacopoeia.
Using ATR, measures the basic performance of the
spectrometer based on factory recommended tests.
Nicolet iS50 Spectrometer Getting Started
23