Operation Of Easyconnect And Oem Model - Levitronix PuraLev i100SU User Manual

5.2 Operation of EasyConnect and OEM Model

5.2.1 Operation with PLC
Enable:
not active
Priming: on
Enable: active
ON
(Priming Mode)
Status : active
Error : not active
State 10
Timeout,
Process Mode:
active
Figure 30: PLC interface state diagram for standard firmware
PL-4063-00, Rev03, DCO# 20-275
Power On
Status : not active
Enable: not active
(Speed Control Mode)
Timeout,
Process
Status : Active
Mode:
Error : not active
not active
Process Mode:
not active
(Process Control
Status : Active
Error : not active
(For other configurations refer to alternate firmware documentation)
Off
State 1
Priming: off
Enable: active
ON
Internal Error
State 5
Process Mode:
active
Enable:
not active
ON
Mode)
State 6
User Manual for PuraLev
www.levitronix.com
Reset: Pulse 300-700 ms
ERROR
Status : not active
Error : active
State 4
Internal Error
®
i100SU
34