Automatic Station Scan; Manual Station Scan; Scan Setting - TechniSat DIGITRADIO 30 Instruction Manual

8.3

Automatic station scan

> Push the selection knob to automatically search
for the next station with sufficient signal strength.
If a FM station with sufficient signal strength is
found, the scan stops and the station is played. If
an RDS station is being received, the station name
appears and, possibly, the radio text.
8.4

Manual station scan

> Turn the selection knob to set the frequency of the
desired station.
The display shows the frequency in steps of 0.05
MHz.
8.5

Scan setting

In this menu item it is possible to set the sensitivity of the
scan.
> Push the MENU button and select [Scan settings].
> Select whether the scan should only stop for
stations having a strong signal [Strong stations
only] or for all stations [All stations].
With the "All stations" setting, the scan stops
automatically at each available station. This
can result in weak stations being played with
background noise.
82