Connect External Power Supply To Mx3Plus Or Cradle (Optional); Figure 12 Us Ac/Dc 12V Power Supply And Automotive Power Adapter; Figure 13 International Ac/Dc 12V Power Supply; Figure 14 Connect External Power Supply - LXE MX3Plus User Manual

14

Connect External Power Supply to MX3Plus or Cradle (Optional)

The LXE-approved AC Power Adapter is only intended for use in a 25ºC (77ºF) maximum ambient
temperature environment.
There are three external power supplies available for the MX3Plus desktop cradle:
Figure 11 US AC/DC 12V Power Supply and Automotive Power Adapter
The DC power jack is located on the endcap. The standard MX3 cradle power jack is located on
the back of the MX3 cradle (the passive cradle does not have a power jack).
1. Insert the barrel connector into the power jack on the MX3Plus endcap and push in firmly.
2. The CHGR LED above the keypad illuminates when the computer is receiving external
power through the power jack.
Note:
See section titled LED Functions for explanations of the LEDs for the BATT B and BATT M
illuminations.
MX3Plus User's Guide
•
US AC/DC 12V Power Supply
•
Cigarette Lighter Adapter
•
International AC/DC 12V Power Supply
Figure 12 International AC/DC 12V Power Supply
Figure 13 Connect External Power Supply
When the mobile device is receiving external power through a powered cradle, the
cradle's Status LED and the mobile device's CHGR LED are illuminated.
Optional Devices
E-EQ-MX3PLUSOGWW-B