Summit Client Configuration; Summit Client Utility; Help; Figure 5-1 Summit Client Utility (Scu) - LXE MX5X Reference Manual

154

Summit Client Configuration

Note:
Start the Summit Client configuration by tapping the Summit Client Utility icon on the desktop.
You can also start the Summit Client utility by tapping Start | Programs | Summit | SCU.
Important: After making changes to a profile, tap the Commit button and perform a Warm Reset /
Suspend and Resume.

Summit Client Utility

Access: Start | Programs | Summit | SCU or SCU Icon on Desktop
The Main tab provides information, the Admin Login and active config (profile) selection.
Profile specific parameters are found on the Config or Profile tab. The parameters on this tab can
be set to unique values for each profile.
The Status tab contains information on the current connection.
The Diags tab provides utilities to troubleshoot the client (network device). Update Driver and Site
Survey functions are not available in this release. Contact your LXE representative for availability.
Global parameters are found on the Global Settings or Global tab. The values for these parameters
apply to all profiles.

Help

Help is available by clicking the ? button in the title bar on most SCU screens.
SCU Help may also be accessed by selecting Start | Help and tapping the Summit Client Utility
link. The SCU does not have to be open to view the help information using this option.
MX5X Reference Guide
Summit Client Utility Icon
Terminology used on your screen displays may be different than those shown in the
figures in this chapter.

Figure 5-1 Summit Client Utility (SCU)

Summit Client Configuration
or
E-EQ-MX5CERG-D