Touchscreen; Calibration; Figure 23 Touchscreen Recalibration - LXE MX3X User Manual

Touchscreen

Touchscreen

Calibration

If the touchscreen is not responding properly to pen touch taps, you may need to recalibrate the
touchscreen. Recalibration involves tapping the center of a target. If you miss the center, keep the
stylus on the screen, slide it over the target's center, and then lift the stylus.
If the touchscreen is not accepting taps or needs recalibration, press <Ctrl>+<Esc> to force the
Start Menu to appear.
To recalibrate the screen, select Start | Settings | Control Panel | Stylus | Calibration tab.
To begin, tap the Recalibrate button on the screen with the stylus.
Follow the instructions on the screen and press the Enter key to save the new calibration settings
or press Esc to cancel or quit.
E-EQ-MX3XOGWW-L

Figure 23 Touchscreen Recalibration

23
MX3X User's Guide