Spray Arms; Drain Pump - Kernau KDI 4443 I User Manual

To remove and clean the filter combination, turn it counter clockwise and remove it by lifting it upwards
(1).Pull the coarse filter out of the micro filter (2).Then pull and remove the metal filter (3).Rinse the filter
with lots of water until it is free of residue. Reassemble the filters. Replace the filter insert, and rotate it
clockwise (4).
• Never use your dishwasher without a filter.
• Incorrect fitting of the filter will reduce the washing effectiveness.
• Clean filters are necessary for proper running of the machine.

SPRAY ARMS

Make sure that the spray holes are not clogged and that no food waste or foreign object is stuck to the spray
arms. If there is any clogging,remove the spray arms and clean them under water. To remove the upper spray
arm undo the nut holding it in position by turning it clockwise and pulling it downwards. Make sure that the
nut is properly tightened when refitting the upper spray arm.

DRAIN PUMP

Large food residues or foreign objects which were not captured by the filters may block the waste water
pump. The rinsing water will then be above the filter.
1
3
2
b
a
4
c
56