Chapter 5. Loading Your Dishwasher; Recommendations - Kernau KDI 4443 I User Manual

Level
1
2
3
4
5

CHAPTER 5. LOADING YOUR DISHWASHER

For best results, follow these loading guidelines. Loading the household dishwasher up to the capacity
indicated by the manufacturer will contribute to energy and water savings. Manual pre-rinsing of tableware
items leads to increased water and energy consumption and is not recommended You can place cups, glasses,
stemware, small plates, bowls, etc. in upper basket. Do not lean long glasses against one another or they
cannot remain steady and may receive damage. When placing long stem glasses and goblets, lean them
against the basket edge or rack and not against other items. Place all containers such as cups, glasses and
pots into the dishwasher with the opening facing downwards otherwise water can collect on items.
If there is cutlery basket in machine, you are recommended to use the cutlery grid in order to obtain the best
result. Place all large (pots, pans, lids, plates, bowls etc.) and very dirty items in the lower rack.Dishes and
cutlery should not be placed above each other.
WARNING
Take care not to obstruct the rotation of spray arms.
WARNING
Make sure after loading the dishes do not prevent opening the detergent dispenser.

RECOMMENDATIONS

Remove any coarse residue on dishes before placing the dishes in the machine. Start the machine with full
load.
INPORTANT
Do not overload the drawers or place dishes in the wrong basket.
WARNING
To avoid any possible injuries, place long-handle and sharppointed knives with their sharp
points facing down or horizontally on the baskets.
Brightener Dose
Rinse-aid not dispensed
1 dose is dispensed
2 doses are dispensed
3 doses dispensed
4 doses dispensed
47
Indicator
P1-9h LEDs are on
P2-9h LEDs are on
1/2-9h LEDs are on
3h-9h LEDs are on
6h-9h LEDs are on