Chapter 7. The Control Panel - Kernau KDI 4443 I User Manual

CAUTION
According to regulations 1016/2010 and 1059/2010, Eco program energy consumption values
may differ. This table is in line with regulations 2019/2022 and 2017/2022.
1. On/Off button
2. Programme Selection Button
i. Programme Leds
3. Half Load Button
ii. Half Load Led
1. On/Off Button
Switch the machine on by pressing On/Off button. When machine is on, the End Of Programme Indicator
(VI) will illuminate.
2. Programme Selection Button
Select a suitable programme for your dishes by pressing Programme Selection button. The Programme Led
(i) corresponding to the selected programme will illuminate and the End Of Programme Indicator (VI) will
switch off. The programme will start automatically when the door is closed.
3. Half Load Button
Press the Half Load button to reduce the duration of the selected programme, and therefore decrease your
energy and water consumption. When Half Load option is selected, Half Load led (II) will illuminate.
4. Delay Button
Press the Delay button to delay the start time of a programme for 3, 6 or 9 hours. Pressing once will delay
the start time for 3 hours, pressing twice for 6 hours, and three times for 9 hours. Press the Delay Timer
button to change or cancel the delayed start time. The Delay led (III) corresponding to the remaining delay
duration (3h, 6h, 9h) will be on. If you switch off the machine after activating the delay time, the delayed
time is cancelled.

CHAPTER 7. THE CONTROL PANEL

I
2
1
II
IV
V
III VI
4
3
4. Delay Button
iii. Delay Leds
iv. Salt Indicator
v. Rinse Aid Indicator
vi. End of Programme Indicator
51