Water Softener System; Setting; Detergent Usage; Filling The Detergent - Kernau KDI 4443 I User Manual

WATER SOFTENER SYSTEM

The dishwasher is equipped with a water softener which reduces the hardness in the mains water supply. To
find out the hardness level of your tap water, contact your water company or use a test strip (if available).

SETTING

In order to change the salt level, follow the below steps:
• Open the door of the machine.
• Turn on the machine, and press the Programme button as soon as the machine is turned on.
• Hold down the Programme button until all leds blink once.
• The machine will display the last setting.
• Set the level by pressing the Programme button.
• Switch off the machine to save the setting

DETERGENT USAGE

Only use detergents specifically designed for domestic dishwashers. Keep your detergents in cool, dry places
out of reach of children. Add the proper detergent for the selected program to ensure the best performance.
The amount of detergent needed depends on the cycle, load size, and soil level of dishes.
Do not fill detergent into the detergent compartment more than required; otherwise you can see whitish
streaks or bluish layers on glass and dishes and may cause glass corrosion. Continued use of too much
detergent may cause machine damage. Using little detergent can result in poor cleaning and you can see
whitish streaksin hard water. See the detergent manufacturer's instructions for a further information.

FILLING THE DETERGENT

Push the latch to open the dispenser and pour in the detergent. Close the lid and press it until it locks in
place. The dispenser should be refilled just before the start of each programme. If the dishes are heavily
soiled, place additional detergent in the prewash detergent chamber.
DETERGENT
45