AC Infinity CLOUDLINE PRO S Series User Manual page 44

PROGRAMMING
T-SERIES
ADDITIONAL NOTES — AUTO MODE SETTING
Please note that high humidity triggers will activate your device to turn on if the relative humidity
levels meet or exceed
relative humidity levels meet or
All four trigger programming in AUTO mode can run and activate concurrently. Reset any unused
trigger programming to avoid unintended or unnecessary device activation. Controllers utilizing the
UIS plug can only turn outlet devices on or off. Products shown here may still be in development.
LOW HUMIDITY
TRIGGER POINT
ON OFF
HIGH HUMIDITY
TRIGGER POINT
OFF ON
Make sure to set the appropriate programming for your chosen device(s). Check for active advance programming
on the AC Infinity app, and make sure that your transition figure, maximum, and minimum settings are appropriately
set. This can alter how quickly your devices ramp up in levels.
44
your set figure. Low humidity triggers will activate your device to turn on if the
fall below
HUMIDIFIERS: LOW
HUMIDITY TRIGGER
Low humidity triggers will
activate your humidifier
if relative humidity levels
meet or fall below your
set figure.
DEHUMIDIFIERS: HIGH
HUMIDITY TRIGGER
High humidity triggers
will activate your
dehumidifier if relative
humidity levels meet or
exceed your set figure.
your set figure.
LOW TEMPERATURE
TRIGGER POINT
ON OFF
HIGH TEMPERATURE
TRIGGER POINT
OFF ON
HEATERS AND HEAT MATS:
LOW TEMPERATURE TRIGGER
Low temperature triggers
will activate your heater if
temperature levels meet or fall
below your set figure.
A/Cs AND COOLING FANS:
HIGH TEMPERATURE TRIGGER
High temperature triggers will
activate your fan or air conditioner
if temperature levels meet or
exceed your set figure.