AC Infinity CLOUDLINE PRO S Series User Manual page 38

PROGRAMMING
T-SERIES
1. PORT BUTTON
Cycles through up to four
connected devices. Each device
is programmed independently, or
together when navigating to ALL.
4. UP/DOWN BUTTONS
Adjusts the value of your current
mode. The up button increases
and down button decreases
the setting. Hold both to reset
values to OFF/Default.
6. PROBE TEMP.
Displays the current
temperature that the probe is
detecting. Shows "--" if no probe
is plugged in. Includes a trend
indicator that signals a rise,
stability, or fall in temperature
within the last hour.
8. CONTROLLER MODE
Displays the controller's
current mode. Pressing the
mode button cycles through
the available modes.
11. CURRENT LEVEL
Displays the connected
devices' current setting.
Includes a trend indicator that
signals if the setting is currently
rising, falling, or holding steady.
38
2. MODE BUTTON
Cycles through the controller's modes:
OFF, ON, AUTO (4 triggers), TIMER to
ON, TIMER to OFF, CYCLE (ON and
OFF), and SCHEDULE (ON and OFF).
5
8
2
1
3
9. ALERT ICONS
Displays alerts and statuses of the
controller, including the controller lock,
CLIMATE alert, and TIMER alert.
12. COUNTDOWN
Displays the countdown of the TIMER
TO ON, TIMER TO OFF, CYCLE,
or SCHEDULE mode activates or
deactivates the devices. TO ON shows
the amount of time left before the devices
turn on. TO OFF shows the amount of
time left before the device turn off.
3. SETTING BUTTON
Cycles through the controller's
settings: DISPLAY, CLOCK,
°F/°C, CALIB. T°/H%, and
TRANS.T°/H%.
5. PORTS
Displays all connected devices
as well as their current level.
10
Digits are displayed by the UIS
symbol when a device is plugged
6 11
into its corresponding port.
12
7
7. PROBE HUMIDITY
Displays the current humidity
13
9
that the probe is measuring.
Shows "--" if no probe is plugged
in. Includes a trend indicator that
4
signals a rise, stability, or fall in
humidity within the last hour.
10. CURRENT TIME
Displays the current time. The
internal battery sustains the
clock so it does not default to
00:00 if power is cut off.
13. USER SETTING
Displays the value of your
current mode. Use the up or
down buttons to adjust the value.