AC Infinity CLOUDLINE PRO S Series User Manual page 47

PROGRAMMING
T-SERIES
SCHEDULE MODE (ON AND OFF)
Sets an on clock-time and an off clock-time
schedule for the devices to follow daily. Press
the up or down button to first set up an on
clock-time to trigger ON mode, then press the
mode button to set an off clock-time to trigger
OFF mode. Please be sure to set the current
clock time under settings.
When the devices are triggered to activate, they
will run at the level set in ON Mode. When the
devices are triggered to deactivate, they will run
at the level set in OFF Mode.
The countdown will begin if no buttons are
pressed for 5 seconds. The time left on the
countdown before the next on or off phase is
displayed below the current level. The devices
will not follow this schedule if you leave this
mode. If you re-enter the Schedule Mode, they
will continue to follow the latest schedule you
have set.
If there is a level set in OFF Mode other
than zero, the devices will run at that level
when triggered to turn off.
47