AC Infinity CLOUDLINE PRO S Series User Manual page 45

PROGRAMMING
T-SERIES
TIMER TO ON MODE
Pressing the up or down button sets a countdown
time. Once the timer ends, the devices will trigger
to run at the level set in ON Mode. If there is a level
set in OFF Mode, the devices will run at that level
during the countdown.
The countdown will begin if no buttons are pressed
for 5 seconds. The time left on the countdown is
displayed below the current level. Leaving the timer
mode while the countdown is running will pause it
until you return to this mode.
TIMER TO OFF MODE
Pressing the up or down button sets a countdown
time. The devices will run at the level set in ON
Mode until the countdown ends. If there is a level
set in OFF Mode, the devices will run at that level
after the end of the countdown.
The countdown will begin if no buttons are pressed
for 5 seconds. The time left on the countdown is
displayed below the current level. Leaving the timer
mode while the countdown is running will pause it
until you return to this mode.
If there is a level set in OFF Mode other
than zero, the devices will run at that
level when triggered to turn off.
If there is a level set in OFF Mode other
than zero, the devices will run at that level
when triggered to turn off.
45