Dismantling; Recycling; Consumables And Waste - Danfoss ET4200 Operator's Manual

8.1

Dismantling

8.2

Recycling

8.3

Consumables and waste

CAUTION!
Risk of injuries!
Parts of the machine/unit may be under pressure and/or tension.
Loosening components may impose a risk of injuries!
•
De-pressurize the machine/unit before performing any work
and check for potential sources of hazard.
This section describes activities to be performed by you as the opera-
tor to ensure the safe dismantling of the machine/unit.
•
The machine/unit may only be dismantled by entrusted and
qualified staff.
•
Open the machine/unit completely.
•
Depressurise the machine/unit before dismantling it (deactivate
the hydraulic pump and secure it against restart; operate valve
manually, if any; open bolted hydraulic connections slowly and
carefully).
•
Check the machine/unit for mechanical tension and consider it
during dismantling.
• Empty the machine/unit of all consumables, see "Maintenance",
Section 6.
The machine/unit contains metal, hydraulic hoses, electric cables and
electronic components, depending on the type.
As regards disposal, the applicable national environmental protection
and waste disposal regulations have to be complied with.
Observe applicable national environmental protection and waste dis-
posal regulations.