Danfoss ET4200 Operator's Manual page 26

We recommend industrial flooring which meets the following
structural requirements
Permanent floor loading
Floor carrying capacity
Floor quality
Evenness
Inclination
Ambient conditions
Ambient temperature
Air humidity
The * data are theoretical/computed values, or values measured on a
prototype. Actual values may vary slightly, depending on the ma-
chine.
Work piece capacity
SAE R12 / 4SP 1 Part fittings
SAE R15 / 4SH 2 Part fittings
SAE R12 / 4SP 2 Part fittings
Industry
90° bend
Die type
Approx. 0.07 kg/mm
2
Min. 2500 kg/m
B25
Max. unevenness 5 mm/m
max. 5 mm/m
C – 35
o o
10 C
45 % – 65 %
1 1/2", depending on the fitting
1", depending on the fitting
1 1/4", depending on the fitting
2"
1 1/2", depending on the fitting
239-xx-Ø
2