Prepare Rack For Chassis Installation - Cisco Nexus 9808 Hardware Installation Manual

Prepare for Installation

Prepare Rack for Chassis Installation

Figure 3: Wearing the ESD Strap
Prepare Rack for Chassis Installation
Install the switch on a standard 19 inch, Electronic Industries Alliance (EIA) rack with mounting rails that
conform to English universal hole spacing according to Section 1 of the ANSI/EIA-310-D-1992 standard.
The spacing between the posts of the rack must be (EIA-310-D-1992 19-inch rack compatible) wide enough
to accommodate the width of the chassis.
Before you move the chassis or mount the chassis into the rack, we recommend that you do the following:
Cisco Nexus 9808 NX-OS Mode Switch Hardware Installation Guide
14