Table of Contents
Advertisement
Unpack and Install the Chassis
Procedure
Step 1
Remove the power shelf bezel from the chassis, if already installed.
This is to ease the installation of chassis doors.
Step 2
On the back side (open side) of one door, pull in on two protruding spring pins so that the pins are held inside
the door frame.
Figure 21: Front Door Pins
Step 3
Align the spring pin to hole in the bottom plate and release the spring pin, so that they insert into the bottom
hole.
Cisco Nexus 9808 NX-OS Mode Switch Hardware Installation Guide
Attach Front Door to Chassis
33
Advertisement
Table of Contents
