Table of Contents
Advertisement
Powering on the Switch
Figure 24: HV Power Tray
1
Figure 25: HVAC Power Connection
Step 3
Verify that the Saf-D-Grid plug is plugged in completely to secure the built-in retaining latch.
Step 4
Turn on the circuit breaker for the HVAC power source circuit.
Note
Rear
If you use both inputs, the IN LED of the power supply is green. If you use only one input, the IN
LED is blinking green.
Cisco Nexus 9808 NX-OS Mode Switch Hardware Installation Guide
Connect HVAC Power Supply to Power Source
2
Front
39
Advertisement
Table of Contents
