Fan Tray Leds - Cisco Nexus 9516 Hardware Installation Manual

Nx-os mode
Hide thumbs Also See for Nexus 9516:
Table of Contents

Advertisement

LEDs
LED
STS
ACT
(management
port LINK)
(management
port ACT)

Fan Tray LEDs

The fan tray LEDs are located on the lower right portion of the module. The following table describes the
possible states for each of these LEDs.
LED
BCN
FAN
FAB
Color
Status
This module is operational.
Green
Flashing
This module is booting up.
amber
Flashing red
Temperature exceeds the major alarm threshold.
Off
The module is not receiving power.
Green
This module is operational and in active mode.
Amber
This module is operational and in standby mode.
The management port is linked up.
Green
Off
The management port is not linked up.
Flashing green
The module is transmitting or receiving.
Off
The module is not transmitting or receiving.
Color
Status
Blue
The operator has activated this LED to identify this module in the chassis.
Off
This module is not being identified.
The fan tray is operational.
Green
Red
One or more fans in this fan tray has failed.
Off
No power is going to the fan tray. Verify that the even numbered fabric slot (FM
2, FM 4, or FM 6) behind the fan tray has one of the following in order to power
the fan tray:
• Functioning fabric module (N9K-C9516-FM or N9K-C9516-FM-E)
The fabric modules behind this fan tray are operational.
Green
Amber
At least one fabric module behind this fan tray is not operating.
Off
No power is going to the fabric module behind this fan tray.
Cisco Nexus 9516 NX-OS Mode Switch Hardware Installation Guide

Fan Tray LEDs

107

Advertisement

Table of Contents
loading

Table of Contents