Procure Tools And Equipment; Rack Mount And Accessory Kits - Cisco Nexus 9808 Hardware Installation Manual

Prepare for Installation

Procure Tools and Equipment

Obtain these necessary tools and equipment for installing the chassis:
• Number 1 and number 2 Phillips screwdrivers with torque capability to rack-mount the chassis.
• 3/16-inch flat-blade screwdriver.
• Tape measure and level.
• ESD wrist strap or other grounding device.
• Antistatic mat or antistatic foam.
• Two-hole ground lug (1).
• Grounding cable (2 AWG recommended), sized according to local and national installation requirements;
• A crimping tool specified by the lug manufacturer that is large enough to accommodate the girth of the
• Wire-stripping tool.
• A maximum of 70 rack mount screws can be used based on your rack selection.

Rack Mount and Accessory Kits

Accessory Kit
Accessory kit (N9K-C9800-IN-KIT) includes the following:
Table 6: Accessory Kit
Illustration
the required length depends on the proximity of the switch to proper grounding facilities.
lug.
Description
Rack mount kit (N9K-C9800-AR-KIT):
• Support rails are non-adjustable
• Set the vertical support rack rails at 32"
pitch
Ground lug kit
• Two-hole lug (1)
• 1/4"-20 Phillips pan-head screws (2)
Cisco Nexus 9808 NX-OS Mode Switch Hardware Installation Guide
Procure Tools and Equipment
Quantity
1
1
11