Table of Contents
Advertisement
The SCSI ID of the tape library must be lower than the tape drive. For example, set
the library ID to 0 and the drive ID to a non-conflicting value such as 5.
For details about the tape drive system you are using, refer to the documentation
that came with the system.
Enclosure Cover
Caution – Only a qualified service technician should remove the Sun StorEdge 5210
NAS to access any of the components inside the server. Always properly replace the
cover prior to powering on the system. Failure to replace the cover properly can
seriously damage internal components.
VGA Port
Do not use the VGA port at the rear panel of the Sun StorEdge 5210 NAS. This
connector is reserved for Sun Microsystems Technical Support staff and is used to
diagnose the file server. For normal operation, use either the Web Administrator
GUI or Telnet (see the software user guide).
VGA Port
Sun StorEdge 5210 NAS VGA Port
FIGURE 3-7
Chapter 3 Using the Sun StorEdge 5210 NAS
35
Advertisement
Table of Contents
