Unpacking The Sun Storedge 5210 Nas And/Or Expansion Unit(S) - Sun Microsystems StorEdge 5210 NAS Hardware Installation

If you purchased one or more expansion units, take a moment to make sure that the
package includes the following listed items. Should any of the items be damaged or
missing, contact your Sun Microsystems sales representative or reseller immediately.
Unpacking the Sun StorEdge 5210 NAS
and/or Expansion Unit(s)
Follow these guidelines for unpacking the equipment.
Caution – Always use two people to remove the unit from its container, to avoid
personal injury or damage to the equipment during installation. A fully loaded unit
weighs approximately 60 pounds.
1. Select a suitable area for unpacking.
2. Store all packing material and boxes for possible equipment returns.
3. Check the Contents Sheet in your product package.
The Contents Sheet summarizes the standard contents for your product.
Expansion unit(s)
Setup Poster
Two SCSI cables
AC power cords (These must be ordered separately from
Sun Microsystems.)
Mounting kit (This must be ordered separately from Sun
Microsystems.)
Chapter 2 Installing the Sun StorEdge 5210 NAS 9