RadioLink RC8X Instruction Manual page 97

RadioLink Electronic Limited
www.radiolink.com
High-Low point：A delay can be set in 2 ranges with Point 1 as the boundary.
Turn ： "Low" and "High" turn direction delay adjustment, the initial value of High or Low turn
speed is 100, 1 to 100 can be selected, if the value is 100, it means there is no delay.
Servo operation is delayed.
Return ： "Low" and "High" return direction delay adjustment, the initial value of High or Low
return speed is 100, 1 to 100 can be selected, if the value is 100, it means there is no delay.
Servo operation is delayed.
Point1: is for speed switching point adjustment. The initial value is 30, 0 to 100 can be selected to
change the "Low" and "High" switching point.
Three points: A delay can be set in 3 ranges with Point 1 and Point 2 as the boundaries.
Turn: "Low", "Middle", or "High" turn direction delay adjustment.
The initial value is 100, 1 to 100 can be selected, if the value is 100, it means there is no delay.
Servo operation is delayed.
"Low", "Middle", or "High" return direction delay adjustment.
Return：
The initial value is 100, 1 to 100 can be selected, if the value is 100, it means there is no delay.
96