RadioLink RC8X Instruction Manual page 131

the character of the model name you want to set or change, click "Confirm" at the bottom of
the screen to save the setting.
Attention: when you click "Paste model", a question "Copy data error. Please copy again!"
means you have copy data, you have to copy data from another model and then paste to the
model you need. Copy model and paste model will not succeed for one model.
Reset: all the models' data can be reset to the factory setting. For example, if you want to
reset the memory of model_1, you need to click the button "model_1", click "Reset", click
"Confirm" when the question "Are you sure to reset the model? model_1" have pop out.
Delete model: Select the model to be deleted. Click Delete Model, and then confirm to
delete the model.
130
RadioLink Electronic Limited
www.radiolink.com