RadioLink RC8X Instruction Manual page 60

Back: click the button
Alarm time: the time to trigger the alarm. When the current time reaches the alarm time, the
transmitter will alarm. It defaults will alarm at 5 minutes and 0 seconds, which can be customized.
The value on the left of M represents minutes, and the value on the left of S represents seconds,
which can be customized.
Attention: M indicates Minute and S indicates Seconds
Mode: the mode for timer, "Up timer" and "Fuel down timer" can be selected, click the
blue select box at the right of Mode to set.
Up timer: starts at 0 and displays the elapsed time up to 99 minutes 59 seconds.
Fuel down timer: starts from the chosen time, displays time remaining, and stops at 0.
Voice:
Type1: When the timing time reaches the alarm time you have set, the transmitter will vibrate
for 2 seconds.
Type 2: If the timer function is turned on, there is a sound reminder every second. And, when
the timing time reaches the alarm time you have set, the transmitter will vibrate for 2 seconds.
Start: the switch to trigger the timer, PS1, PS2, PS3, PS4, PS5, Steering, and Trigger can be
selected. If set Steering switch or Trigger switch as the start switch, rotate the SS or push the TS
switch to the end to start the timer function.
Attention: If the switch is set as the timer start switch, it will override the function that was
set previously. Before setting the timer start switch, please check if the button you are ready to
select has occupied or not in the "Channel setting" menu.
For example: If you are ready to select the button PS1 to trigger the timer function, you
or short press the power button to return to the previous menu.
59
RadioLink Electronic Limited
www.radiolink.com